
What do I need to provide?
- Floor plans, sections & elevations
- Orientation e.g. site plan
- Construction specification of walls, roofs and floors
- Specification for all windows
- Primary & secondary heating systems
- Renewable technology (if any)
What is included?
- All the relevant SAP documentation required for compliance with the Building Regulations;
- Additional necessary recommendations to ensure a pass is achieved every time;
- U-value calculations for submission to Building Control
- Comprehensive advice and support throughout the whole process; and
- Quick turnaround.
How much will it cost?
- Single Dwelling = £120*
- Multiple Dwellings = £POA*
- EPC = £40 per unit*
- * Prices exclude VAT
Payment Terms
Payment upon completion, by BACS or cheque
Contact Us

What do I need to provide?
- Floor plans, sections & elevations for existing dwelling & extension
- Orientation e.g. site plan
- Construction specification of walls, roofs and floors for existing dwelling & extension
- Specification for all windows
- Primary & secondary heating systems
- Renewable technology (if any)
What is included?
- All the relevant SAP documentation required for compliance with the Building Regulations;
- Additional necessary recommendations to ensure a pass is achieved every time;
- U-value calculations for submission to Building Control
- Comprehensive advice and support throughout the whole process; and
- Quick turnaround.
How much will it cost?
- Single Dwelling = £150*
- * Prices exclude VAT
Payment Terms
Payment upon completion, by BACS or cheque
Contact Us

What do I need to provide?
- Floor plans, sections & elevations
- Orientation e.g. site plan
- Construction specification of walls, roofs and floors
- Specification for all windows
- Primary & secondary heating systems
- Renewable technology (if any)
What is included?
- All the relevant SAP documentation required for compliance with the Building Regulations;
- Additional necessary recommendations to ensure a pass is achieved every time;
- U-value calculations for submission to Building Control
- Comprehensive advice and support throughout the whole process; and
- Quick turnaround.
How much will it cost?
- Single Dwelling = £120*
- EPC = £40 per unit*
- * Prices exclude VAT
Payment Terms
Payment upon completion, by BACS or cheque
Contact Us

What do I need to provide?
- Floor plans, sections & elevations
- Orientation e.g. site plan
- Construction specification of walls, roofs and floors
- Specification for all windows
- Services specification (i.e. space heating / hot water / lighting / ventilation)
- Renewable technology (if any)
What is included?
- All the relevant SBEM (BRUKL) documentation required for compliance with the Building Regulations
- Additional necessary recommendations to ensure a pass is achieved every time
- U Value calculations for submission to Building Control
- Comprehensive advice and support throughout the whole process; and
- Quick turnaround
How much will it cost?
- Single unit = from £300*
- Multiple units = £POA*
- EPC = from £150* (issued and invoiced post construction)
- * Prices exclude VAT
Payment Terms
Payment upon completion, by BACS or cheque
Contact Us

What do I need to provide?
- Integrity of structure must be complete prior to the test
- Access to external door (approx. 2.1m x 0.9m)
- Design stage SAP calculations
- Floor plans and section drawings
- Contact details for site
What is included?
- Building air leakage test compliant with ATTMA TSL1
- Same day retesting should building provisionally fail
- Guidance concerning potential air leakage paths
- Air test certificate available within 24 hours
How much will it cost?
- Single Dwelling from £180*
- Additional dwelling from £50* + VAT per unit
- * Prices exclude VAT
Payment Terms
Payment upon completion, by BACS or cheque
Contact Us
What do I need to provide?
- Number of basins and taps and flow rates in l/min
- Number of showers and flow rates in l/min
- Number of toilets & flush volumes
- Kitchen tap flow rate in l/min
- Bath capacity to overflow in litres
- Dishwasher & washing machine details if fitted
What is included?
- All relevant documentation for compliance with Part G
- Additional necessary recommendations to ensure a pass is achieved every time
- Comprehensive advice and support throughout the whole process
How much will it cost?
- Single Dwelling = £50*
- * Prices exclude VAT
Payment Terms
Payment upon completion, by BACS or cheque
Contact Us
What do I need to provide?
- The system type to be tested (i.e. System 1 - intermittent fans, System 3 - MEV,System 4 - MVHR)
- Number of extract fans to be tested
- All extract fans should be installed and wired
- Location and contact details of site
What is included?
- Ventilation testing compliant with Part F of the Building Regulations
- Advice on remedial measures should the testing fail
- Certificates available within 24 hours
How much will it cost?
- Single dwelling = £50* (if performed in conjunction with an air leakage test
- £POA* (if an air leakage test is not being performed)
- * Prices exclude VAT
Payment Terms
Payment upon completion, by BACS or cheque
Contact Us
What do I need to provide?
- Floor plans, sections & elevations
- Orientation e.g. site plan
- Construction specification of walls, roofs and floors
- Specification for all windows
- Services specification (i.e. space heating / hot water / lighting / ventilation
- Renewable technology (if any)
- Copy of planning conditions set by LPA (if available)
What is included?
- A review of the relevant Planning policies / conditions
- A clear and concise statement / report outlining how the planning condition(s) will be met
- Calculation of the required specification and / or size of renewable technologies
- All the necessary consultancy required to ensure the development satisfies the condition
- Quick turnaround
How much will it cost?
- Single unit = from £200*
- Multiple units = £POA*
- * Prices exclude VAT
Payment Terms
Payment upon completion, by BACS or cheque
Contact Us

What do I need to provide?
- Drawings (dwg or pdf) of the junction details to be assessed
- Specification (i.e. manufacturer and product names of the materials in the junction)
What is included?
- A review of the junction in question
- Certification of the calculated psi value (In accordance with BR497) and temperature factor (in accordance with IP1/06)
- Feedback and advice for any underperforming junctions
- Quick turnaround
How much will it cost?
- 2D = from £150*
- 3D = from £250*
- * Prices exclude VAT
Payment Terms
Payment upon completion, by BACS or cheque
Contact Us

- No hidden costs
- No forms
- Excellent Service
- FREE advice and support
- FREE U-value calculations
- FREE PEA
- Licensed Assessors
- Quick Turnaround